
We Provide Service to Brookshire & All Surrounding Cities
Trusted Chimney Sweep Professionals in Brookshire TX
Our Chimney Sweep Pros will have your home and interiors good as new in no time. We promise!
What should a Brookshire homeowner know before lighting the first fire?
Brookshire is about 35 miles from downtown Houston, out where the land opens up to prairie, farms and wide skies. Out here the wind has room to run, and storms that cross the flat country hit rooftops and chimney tops head on. By the time a cool snap arrives, your chimney has spent months taking heat, rain and wind without anyone looking at it.
Before the first fire of the season, the flue should be clear, the damper should open and close, and the cap and crown should be in one piece. That is exactly what a yearly sweep and inspection confirms, and it is far easier to arrange in October than in the middle of a cold week when everyone calls at once.
It also helps to think about the smoke path as a chain. The firebox holds the fire, the damper opens the way, the flue carries smoke up, and the cap and crown finish the job. If one link is blocked, cracked or rusted, the whole chain suffers, and the first sign is usually smoke in the room or a fire that will not draw. Looking at every link once a year is what keeps the fireplace dependable.
Do older country homes have different chimney problems?
Often they do. Older homes and farmhouses tend to have full masonry chimneys, and masonry ages. Mortar joints soften, bricks spall, and flue liners built decades ago can crack or separate. A fireplace that still looks fine from the living room can hide problems higher up.
Newer homes are not exempt. Factory-built fireplaces and metal flues have their own weak points, like rusted caps and warped dampers. Whatever you have, the same basics apply: keep the flue clean, keep water out, and have someone look at the parts you cannot see from the floor.
- Older masonry: check mortar, liner and crown
- Newer builds: check the damper, cap and metal parts
- Any age: clear soot and creosote every year
What is included in the $99 sweep and inspection?
The visit starts at $99 and covers a chimney sweep plus a check of the flue, firebox, damper, cap and crown. You get a clean chimney and a clear answer on its condition.
If anything beyond a sweep turns up, we explain what it is and what it costs before any extra work begins. Nothing gets added to the job without your say-so. That is the whole idea: a low price to get a knowledgeable person looking at the chimney, and honest pricing on anything further.
How quickly can I get on the schedule?
Go online, pick a day and choose a 3-hour arrival window. The office calls or texts to confirm, and your technician calls about 30 minutes before arriving. There is no waiting around all day for a vague time slot.
If you burn wood from your own property, or you run a wood stove as a main heat source on cold nights, a pre-season appointment is especially worth it. Creosote builds faster with damp or unseasoned wood, and it is the buildup that causes chimney fires. Gas logs and decorative fireplaces are welcome too, at the same starting price.
Do you serve towns near Brookshire?
Yes. Our crews also cover these nearby towns:
- Chimney Sweep Pattison
- Chimney Sweep Katy
- Chimney Sweep Fulshear
- Chimney Sweep Simonton
- Chimney Sweep Weston Lakes
- Chimney Sweep Orchard
- Chimney Sweep Rosenberg
- Chimney Sweep Richmond
Frequently asked questions
What does a chimney sweep cost in Brookshire, TX?
A chimney sweep and inspection starts at $99. Any extra work is explained and priced before it starts.
Is it worth sweeping a fireplace I rarely use?
Yes. Even a fireplace used a few times a year collects soot, and animals and moisture can settle into an idle chimney. A yearly check catches those problems before you light a fire.
Do you inspect the cap and crown?
Yes. The cap, crown, flue, firebox and damper are all part of the visit, since water entering from the top is one of the most common chimney problems.
How do I schedule a visit?
Book online, choose a day and a 3-hour arrival window. The office calls or texts to confirm, and the technician calls about 30 minutes before arriving.
When was the last time you cleaned your Chimney?
Over 25,000 chimney fires in the U.S. last year were responsible for over $120 million in property damage. Chimney fires can quickly spread into house fires in a relatively short period of time.
Top 3 Reasons to Sweep your Chimney
The importance of yearly chimney inspections and sweepings cannot be understated, as they are the one true way to minimize the likelihood of a chimney fire sparking in the first place. The fact is that clean chimneys simply don’t catch fire.
- Prevent Chimney Fires
- Protect Your Health
Breathing the fumes from gas or solid fuel fires can be dangerous—or even fatal. - Avoid Smoke Damage
If a chimney is not cleaned regularly, soot will accumulate around the flue. This makes it difficult for the flue to draw the smoke upwards and can cause the smoke to enter your room. This soot will leave a black film around your hearth and soil any furniture, carpeting, or nearby decor. Smoke can also leave black stains around your chimney, which can be difficult or sometimes impossible to remove.



What Degree of Creosote is in Your Chimney?
A buildup of creosote is the main reason why it’s important to have your chimney cleaned and inspected annually, but did you know that there are three degrees, or stages, of creosote?
Soot: While not dangerous, soot is flammable and spreads easily, leaving dirt stains in your home and potentially causing respiratory illnesses.
Creosote flakes: If soot isn’t addressed in a timely manner, over time it can morph into larger flakes, which are highly flammable and more difficult to remove.
Tar creosote: Severe disrepair. At this stage, the creosote coalesces to form a thick, extremely flammable paste along the walls of the chimney. The tar releases gasses, which remain in the chimney flue until a fire is lit. At that point, the gasses as well as the tar will catch fire almost immediately.
Chimney Fire Causes
Factors that increase risk of chimney fires include:
- Failing to have your chimney swept often enough, which can lead to soot buildup
- Blockages such as soot buildup, animal nests, or bits of foliage in your chimney that can restrict air flow
- Burning wet or unseasoned wood, which increases the production of creosote



We Offer Top-notch Service At Unbeatable Prices

& Dryer Vent Cleaning
- Rotor Brush Cleaning
- Soot & Creosote Removal
- Full Inspection
- Rotor Brush/Lint Removal
David was prompt and very professional. He inspected and cleaned the fireplace & went over everything that he did and provided valuable information. Price was better that competitor's. I will definitely continue to do business with this company.
Very pleased with the professionalism and promptness of service. Chad was very helpful and courteous and the work was done quickly and efficiently at significantly less cost than the first quote we received. Happy to recommend Chimney Xpert.
Professional and polite company-I was able to get in the schedule the following week of my initial request for service. My tech was Conner and he did a great job. Going to have them back to repair the fireplace gas line.
Can't say enough good things about this company. James is extremely easy to communicate with, and is glad to answer any questions. The installers were extremely quick, but did a very quality job, at an affordable price. If I need any future chimney work I will definitely be coming back to Chimney Master Dallas.
I will try to keep this short and sweet! From dealing with the owner about what our needs really were to keeping the communication lines open and his team installing our new Buck Stove.
There is no way I could have been any more pleased with the entire experience. Their team are "First Class" all the way


